
2024 - Update on the cars with me.
15 December 2024
Front Touch Up
Toto has racked up quite a few miles and as you can imagine there a few signs of wear, so touching these up, cleaning and checking was amongst the activities for 2024. In these two images you can see the front wishbones, which do get hit by road denris, being cleand, repainted and refitted.
Braking Adjustments
The other problem these cars can suffer from is brakes that feel very wooden. Because there are no servos on my cars, the master cylinder, which orignially did have a servo when used without has limited movement and makes the pedal feel very hard and have a small range of movement. I have changed the mechanical advantage on Totos brake pedal from ~5:1 to 7:1, this gives a longer throw and improved feeling. This is good, but the braking proportion, dictated by the caliper piston size, is still overly biased to the front. Remember the Audi 100/A6 that was the origing for these cars was very front heavy, especially if you used a 2wd avant as base, the rear was very light. This is the opposite now the engine and gearbox are in the back, and as such under heavy braking the nose dives and the rear floats, which can be a bit squirrily! I decided a larger caliper piston on the rear would be a good idea, and as I was in there let's see if we can get electric handbrakes working. I found a caliper that matched both these requirements and set about fitting them. There were some challenges, but once fitted and issues overcome, the brakes were a lot better. The electronic handbrake is excpetionally good and it meant I can remvoe the cables and handbrake lever form the cockpit. I have used a DPDT rotary switch for the control of the handbrake, when time allows I will work on a single touch on/off and integrate it with the CANBUS to adjust how this operates if the car is at speed, I believe this is standard in production cars.

