Buttercup: the Edge Devil Inline 5
This is the build of my first Edge Devil, started back in 2006, completed in a 2009, then adjusted, tuned and improved over the next 10+ years.
The project
Toto is the third Edge Devil I have built. The kit had spent years in France, where its previous owner had started the build. After recovering the kit and donor cars in 2019, I continued the work in the UK, building around an Audi V8 and drawing on what I had learned from the earlier cars.
The work covered a full mechanical rebuild, suspension and brakes, wiring and engine management, bodywork, tuning, and the Individual Vehicle Approval (IVA) process. The car passed its IVA retest in December 2020 and was registered in January 2021.
Milestones
- 2019: Recovered the kit and donor cars from France.
- 2020: Rebuilt and assembled the car, then completed the rolling-road session and IVA.
- 2021: Registered Toto and began road testing and ongoing refinements.
Photos
Videos
Rolling-road session at Emerald
The first full-power rolling-road session before the IVA.
IVA speedometer test
The speedometer test that helped get the car through its IVA retest.
Related links
- The third build beginsHow the project began with a kit and donor cars recovered from France.
- Build phases 1–4The build diary, from the engine and chassis through wiring and bodywork.
- Rolling-road sessionFirst full-power tuning session at Emerald.
- First few thousand milesUpdates and lessons from getting Toto out on the road.